How to Propagate Alocasia Through Division or Corms

Are you propagating your Alocasia this season, but aren't quite sure where to start? There are two different common methods you can use to accomplish this task. In this article, gardening expert and houseplant enthusiast Madison Moulton guides you through Alocasia propagation via division and corms.

Gardener wearing black gloves adding soil to a flower pot and adding a plant with three stems topped with heart shaped leaves that are dark green with pale green veins. There is soil on the table.

There are so many houseplants to choose from, but few are as diverse as Alocasia. There are several varieties of this stunning tropical plant, ranging from breathtaking shades of green to silvery gray and even purple. Grown indoors, they can reach up to 6 feet but can reach close to 15 feet high when grown outside.

Alocasia is a common choice for growing indoors when you want to add a tropical jungle touch to your home. They are easy to maintain and make a big impact indoors with their large, beautiful leaves.

If you want to grow more of these remarkable plants in your home, propagation is the easiest way to do that. There are a couple of ways to propagate Alocasia, and both have only a few simple steps to follow. Let’s get started on our step-by-step guide to propagating Alocasia plants.

Video Walkthrough

If you prefer to watch a video about Alocasia propagation in addition to reading about it (or instead of) you can watch Madison, one of our gardening experts at All About Gardening, walk through this process in the below video. If not, keep on reading to explore the process, step by step!

Propagating Alocasia Plants

Close up of three large tropical leaves that are heart shaped and dark green with very light green veins. The background is gray and blurred.
These tropical plants are fairly simple to propagate thanks to the rhizomes that form under the soil.

The Alocasia genus is full of gorgeous, leafy plants in a range of shapes, colors, and sizes. There are more than 90 species to choose from and even more cultivars. Many larger species are grown outdoors in tropical environments, but smaller species have been hybridized to grow largely as houseplants.

Alocasias grow from rhizomes under the soil. These rhizomes grow and produce their beautiful variegated leaves, making the plant bigger. This process is also the reason why Alocasias are so easy to propagate – they do most of the work for you. They also produce tiny corms around the base of the plant that can develop into full plants with a bit more patience.

All you need to do is remove the plant from its pot, split the rhizome, and repot to turn one Alocasia into two. If you have a rarer cultivar, this is the best way to replicate it without spending money on brand-new plants. And, as long as you give your Alocasia the proper care, they will keep producing more small plants for you to trim off.

As an added bonus, you can complete two important tasks in one go – dividing and repotting. When your Alocasia has filled all the space in its existing pot, you can divide and plant one of the sections back into the same pot, saving time and limiting your risks of transplant shock throughout the season.

Corms need a bit more attention, including a specialized planting mix and lots of transplanting. But, considering how many corms you can get from one plant, this method will likely yield the most plants in one go.

Propagation Through Division

Overhead view of a gardener caring for a tropical plant. Her hands are on the container and the plant, which has five long stems that have large heart shaped dark green leaves with large pale green veins. There is another plant nearby on the ground.
Division is probably the easiest way to propagate Alocasia.

Propagating alocasia by division is ideal for a plant that’s gotten too big for its current pot. Signs of this include slight bulging at the sides or roots growing through the drainage holes. These are indicative that it needs some extra space. Repotting and dividing go hand in hand, allowing you to complete two messy tasks at the same time.

Step 1: Gather What You Need

Potting mix being held by two hands, white particles of perlite are mixed in with the soil that has been taken from a black plastic container.
You don’t need many supplies to propagate Alocasia, but a proper potting mix is one of them.

First, you’ll need a new pot. Or two if you don’t plan on reusing the existing one. The pots should be around the same size as the existing one, or slightly smaller depending on the size of the offset. Avoid excessively large pots as they hold onto more moisture than the plant needs, leading to rotting.

Next, grab a sharp knife to cut into the rhizome. While some can simply be snapped off, it’s far better for the health of the parent plant and the offset to make as clean a cut as possible. Clean it with soap and water before you start to avoid transferring any harmful bacteria from previous propagating sessions.

Finally, you need a soil mix suitable for Alocasias. Regular garden soil or even regular potting soil is not ideal for long-term growth as it increases your chances of rotting. Look for a specialized houseplant potting mix, or make your own with these ingredients:

  • High-quality potting soil
  • Perlite
  • Coconut coir or peat moss

Now for the fun part, propagating. Lay down some newspaper to make clean-up easier, set aside 10 minutes and you’ll have a brand-new plant in no time.

Step 2: Remove the Plant From its Current Pot

Tropical plant that has been removed from its container placed on a table surface by gardener wearing black gloves and a silver watch. There is soil and a couple of gardening tools also on the surface of the table. The plant has long, heart-shaped dark green leaves with pale green veins.
To get a better look at the rhizome, you’ll need to remove the plant from its current pot.

Avoid pulling from the stems as the leaves may easily snap off. Instead, squeeze the sides of the pot to loosen the soil, turn the pot on its side and gently pull the plant out. If your Alocasia is planted in a terra cotta or ceramic pot and gets stuck, you can also run a knife along the edges of the pot.

Step 3: Inspect the Roots

Gardener wearing black gloves holding an unpotted tropical plant in her hands, her right hand is holding some of the roots to inspect them. The table surface has a clay pot and dirt on it.
There are a few reasons why it is important to inspect the roots of your plant while propagating it.

Next, check what’s going on under the soil. This will allow you to identify the areas where any offsets connect to the main plant, ready for separation.

The offsets should be a couple of inches tall before separation in order to grow successfully on their own. If you have a mature and established plant, you may be able to split larger groups in two, but it all depends on the performance of your plant.

This is a good opportunity to check the health of your plant and look for any potential issues. Alocasia plants are prone to rot when overwatered, so use this chance to trim off any problematic roots before planting in fresh new soil.

Step 4: Separate the Offset

Gardener wearing black gloves separating a tropical plant by its roots. The plant has dark green heart shaped leaves with very pale green veins. There is soil, a gardening tool, and a clay pot on the table.
Dividing a plant by its roots can be a messy job.

Now that you have a better idea of what the rhizome looks like, you can begin to divide the plant. Smaller offsets can usually be pulled off the plant without much hassle. Larger ones will require a sharp knife to separate them as cleanly as possible.

If your plant has more than one offset, remove as many as you can to repot, as long as you have enough pots to plant them in.

Step 5: Repot the Plants

Gardener wearing black gloves adding soil to a container where the larger offset of a plant is being placed. The plant has several long lime green stems with dark green heart shaped leaves growing on them. The plastic container is round and black. To the left of this pot is a round clay pot with the smaller offset already planted in it. Soil is spread on the table.
The final step in propagating by division is to plant the offsets into pots.

All that’s left to do is repot your parent plant and its offset into the separate prepared pots. Fill the container with your potting mix up to about halfway, then make a hole in the center to plant the main plant. Add extra soil into the gaps around the roots until the soil line matches where it was previously.

For smaller offsets, you can usually fill an entire pot with potting mix, making a small hole in the center with your finger to plant. Make sure you don’t bury it too deeply as you may rot the base of the plant.

And that’s all there is to it. Your parent plant will look largely the same, albeit smaller, and your tiny Alocasia will be ready to sprout into a full and mature plant in no time.

Propagating With Corms

Three round brown corms next to a small spade with black tip and orange plastic flower pot resting on a marble surface. To the right of the image is a large green leaf with pale green veins out of focus.
The tiny bulbs seen under the soil are called corms.

If your plant doesn’t have any offsets, don’t think your chances of propagating are over. As these offsets sprout from corms or bulbs under the soil attached to the rhizome, you can simply cut out the middleman and propagate these yourself.

Step 1: Gather What You Need

Plastic container with water at the bottom holding four small, round brown corms. One of them has a long root growing from it.
A plastic container is a must-have when propagating Alocasia using corms.

This propagation process is slightly different from others you may have tried but doesn’t require any specialized tools.

To start, you’ll need a sharp and disinfected knife to remove the corms from the rhizome. This is not 100% necessary as many will snap off independently, but it can make removal much quicker for tougher bulbs.

Next, grab a shallow container or glass to hold the corms. Clear containers are best to allow you to monitor growth. It also helps to have a small container with sides to rest the corms upright and slightly out of the water.

When rooting, it’s best to use filtered or distilled water for the best chances of success. Alternatively, collect some rainwater to fill your containers – you won’t need much.

Finally, you’ll need some perlite for the latter part of the process. This substance, made from expanded pieces of volcanic glass, will hold the corms upright in place once they’ve rooted to prevent rotting and to stop the new leaves from falling into the water.

Step 2: Remove the Plant from its Current Pot

Close up of gardener using his hands to remove a tropical plant from its black round plastic container. The soil has white particles of perlite mixed in. There are two heart shaped green leaves growing near the base of the plant.
Be careful when removing the plant from its current pot so as to not disturb the root system too much.

As with division, the first step to propagating is removing the plant from its existing pot. While you may find a few corms above the soil that are easy to remove, you’ll find more of them lower down, closer to the rhizome. If you want to propagate as many corms as possible, removing all the soil around the root ball is your best chance.

Step 3: Find the Corms

Close up of round and brown corm growing among tiny roots in the soil. There is a finger pointing at the corm.
The corms are tiny round brown bulbs that are growing among the roots in the soil.

Next, you’ll need to get your hands dirty hunting for corms or bulbs. These are tiny spherical balls around the size of a peanut that you’ll find in the soil attached to the rhizome.

You should find around five or more if your plant is mature and healthy. As the bulbs may not be viable or can rot during the rooting process, it’s best to take as many as you can at once to improve your chances of successful propagation.

The corms should be easy to remove by hand with only a small portion of the base attached to the rhizome. However, if there is some resistance, you can also cut them off with a sharp, clean knife.

Clean any dirt or debris off the bulbs and remove the outer layer (optional) to get ready for rooting.

Step 4: Root in Water

Three corms that are brown, one of them has a long root growing from it, being held in the palm of a hand.
You will start to see roots growing from the corms after they have been sitting in water for a few days.

Grab your shallow glass or container and fill it slightly with filtered water. The water line shouldn’t be higher than the top of the bulb as it needs space to breathe and to sprout.

Place your corms in the container so the base is in the water and the top is exposed. You can also lay them on their sides until rooting to get a better idea of where the leaves will emerge. Just make sure the bulb is not completely submerged or it will likely rot before getting a chance to sprout.

Step 5: Cover

Close up of a hand holding a few small round brown bulbs with roots growing from them next to a root ball and a dark green leaf with pale green veins. The background is blurred with other plants and garden materials.
Covering the corms will provide the perfect environment for them to sprout healthy roots.

Up the humidity around your corms by covering the container with a lid or another glass. This will provide the right conditions for sprouting. To prevent mold build-up, remove the lid or glass for about an hour each day to improve airflow, replacing it again afterward.

Continue to top up the water to keep the water line consistent. The base of the bulb should always be below the water with some areas sticking above the water line. If the water in the container starts getting consistently cloudy, remove the bulbs and wash the container to stop bacterial buildup before planting again.

Step 6: Transplant

Overhead view of a tropical plant with to fat heart-shaped leaves that are dark green growing from a black round plastic container with coconut coir as the mulch. The container is placed on a gray wooden table.
Once you see leaves on the plant, it is time to transplant it into a container with soil.

In just over four weeks, you should see some roots sprouting from the bulbs and potentially the starts of some new leaves. Some may not have sprouted at all – simply discard those and focus on the ones that have rooted.

To allow the plant to grow upright and to prevent rotting in the new roots or leaves, it’s time to transplant it into perlite. Perlite will hold the corms upright and in the right position, drawing up some moisture to facilitate growth. You can also use hydroponic clay pebbles if you have some on hand.

Continue to top up the water, keeping the top of the corm exposed to the air. Once the leaves have developed more and the roots have grown, you can transplant into a small container filled with soil mix to continue growth. Don’t leave them in perlite for too long as it does not contain the nutrients these plants need to grow once they have matured.

Final Thoughts

Alocasia lovers will have no problems trying these exciting propagation methods. Try the one that best suits your existing plant or try both to grow as many plants as you can at once. You are sure to be pleased with the results either way!

SHARE THIS POST
Small Vining plant growing along a metal wire with tiny heart shaped leaves that are pale green splashed with dark green. A small round tuber is growing on the vine and a finger is pointing at it. The background is dark and blurry.

Houseplants

4 Different Ways to Propagate String of Hearts Plants

If you've decided to propagate your string of hearts plant, you might be confused about the best way to get it done. There are actually four different methods you can use to propagate these popular houseplants! In this article, gardening expert and houseplant enthusiast Madison Moulton walks through each propagation method, step by step.

A recently propagated zz plant that is planted in a black plastic container. It is growing from stem cutting. The gardener is pressing down on the plant into the pot with potting medium around the newly propagated plant.

Houseplants

Three Easy Ways to Propagate ZZ Plants

Are you thinking of propagating your zz plant to create more for around your home? There are three common methods zz plant propagation is done via stem cuttings, leaf cuttings or through division. In this article, gardening expert and houseplant enthusiast Madison Moulton walks through each method, step-by-step.

A beautiful blooming Christmas Cactus indoors with white and red leaves coming off the plant itself.

Houseplants

How to Grow and Care For a Christmas Cactus

Thinking of adding a Christmas Cactus to your indoor or outdoor gardening space? These popular succulents aren't only popular during the holiday season. In this article, gardening expert and houseplant enthusiast Madison Moulton takes you through everything you need to know about the Christmas Cactus and their care.

aloe single leaf

Houseplants

Can You Grow Aloe Vera From a Single Leaf?

Are you thinking of growing an aloe vera plant from a single leaf? There are plenty of plants that can be propagated from just a leaf cutting. In this article, gardening expert Emily Horn walks through if Aloe can be grown from a leaf cutting, and if it's a good idea to attempt it.

How to Care for African Violets

Houseplants

How to Plant, Grow, and Care For African Violets

If you recently planted some African Violets in your garden, in some pots, or around your home, you may be wondering about the best way to care for them to ensure their survival and growth. In this article, we take a deeper look at each step you should take when caring for these plants, no matter where you've planted them around your home.

grow indoor plants from leaves

Houseplants

17 Houseplants That Can Grow From Leaves

Thinking of propagating a new houseplant from just leaves, but aren't sure which one is the best fit for your indoor garden space? There are a number of houseplants that can grow from leaves alone, provided they have the right care. In this article, gardening expert Madison Moulton looks at her favorite houseplants that will grow from just leaves!